Although now Rental server It is very popular, but many enterprises also pay great attention to the security of enterprise data, so they usually choose to buy their own servers to ensure the security of their enterprise data, but the cost of self built computer rooms is a little expensive, and ordinary enterprises are also a little unbearable, so large companies will choose a suitable IDC service provider to host their own servers, So as to reduce their own costs. that Generally speaking, how to select a hosting server cabinet What about? I believe you are also confused about this, so Micronet will take you to understand today.
If you choose a deeper cabinet, you can install two sets of equipment face to face and install more equipment. With the above method, two rows of equipment can be installed in the cabinet. One unloads at the front door of the micro network cabinet, and the other unloads at the rear door. Micron network cabinet must have adjustable position. After calculating the space ('u or 1.75 inches) of the micro network cabinet, the room size must also be considered. I don't want to find that some more devices need to be placed soon after the Micronet cabinet is full. These additional equipment often appear when purchasing and installing cabinets. Therefore, the basic principle is that the cabinet height must be increased by 200% in order to expand the system. This space also improves the ventilation conditions of the equipment. The equipment to install the rack is designed to be cabinet width, but the width of servers and other peripheral equipment that cannot be installed with the rack cannot be ignored, so the width is not necessary.
The total weight of the equipment is often not light, so it is necessary to select a micro network cabinet that can hold about 1500 pounds. In other words, we should choose a strong and solid micro network cabinet. In the cabinet, according to the weight of the equipment, the selection of the sliding frame is the specification or weight, and the selection of other accessories will also be determined. Select a cabinet that is 100% compatible with all servers, meeting or exceeding the third bracket specification of all OEMs and suppliers. The installation of tower or desktop equipment requires a sliding frame and installation accessories.
The equipment includes network cable, communication cable and power cable, so tape with hook or tooth must be purchased to fix the cable in the cabinet orderly. There are cable management modules in the cabinet. It would be better if the cables could be fixed directly on the vertical equipment rails. In both cases, the upper wall and side wall inside the cabinet must have enough fixing rings to protect the cables. In addition, you can lift the bottom plate of the micro network cabinet and walk the line below.
The micro network cabinet looks almost the same, but there are several types that are subdivided according to their uses. There are few cabinets for cabling and servers. The cabinet for cabling is usually used to place multiple terminal switches, and the cabinet for server placement must be locked. Because of the need to protect the valuable equipment inside, the more noble routers and firewalls are usually also in this cabinet.
From the perspective of server cabinets, the ones with grades are ordinary server cabinets and glass doors. The server at the top of the cabinet has a very good cooling effect, but the server at the middle and lower parts has a poor cooling effect.
The above cabinet is a relatively advanced server cabinet. The front and rear doors release ventilation heat through dense ventilation holes, so that the cold air of the machine room air conditioner can be well distributed around all servers in the cabinet, and the cooling effect of the entire cabinet is good.
