How do we choose the leased cabinets? In this era of the Internet of Everything, many companies have access to the Internet, but some companies are very sensitive to data, afraid that the security of data will not be guaranteed, so they will buy their own The server It is used to store data, but the cost of self built machine rooms is too high. At this time, the renting of cabinets in traditional IDC machine rooms comes in handy, which can ensure safe and effective service hosting while saving a large part of the cost. So how do we choose cabinets for renting cabinets? today Neutrino network Let's take a look. There are six main points.
1、 Load bearing guarantee: with the increase of the density of the products placed in the cabinet, good load bearing capacity is the basic requirement for the quality of the cabinet products. The cabinet that does not conform to the specification cannot effectively protect the equipment in the cabinet, and may even affect the entire system.
2、 Temperature control system: the internal temperature of the cabinet is well controlled, which can avoid overheating or supercooling of the products in the cabinet and ensure efficient operation of the equipment. The cabinet can choose full ventilation series, and can be equipped with fans (to ensure the service life of the fans). Independent air conditioning systems can be installed in high temperature environments, and independent heating and insulation systems can be installed in cold environments.
3、 Immunity: The cabinet with complete functions shall be provided with various door locks and other functions, such as dust-proof, waterproof, electronic shielding and other equipment with high immunity, and shall also be provided with appropriate accessories and installation accessories for support, making wiring more convenient, convenient for management and time saving.
4、 Cable management: what should I do if there is a problem with the cable? Walk through the crowded engine rooms in large engine rooms, let alone how to quickly find and repair the faulty lines. As far as the cables in the installation cabinet are concerned, today's data center cabinet has a large density of configurations, can accommodate more IT equipment, and uses a lot of redundant accessories (such as redundant power supplies, memory arrays, etc.). The configuration of equipment in the cabinet changes frequently, and data cables and cables can be increased or decreased at any time. Therefore, the box must be provided with enough cable channels to access cables from the top and bottom of the box. The laying of cables inside the box shall be convenient and orderly, and shall be closely connected with the cable interface of the equipment, so as to shorten the wiring distance, reduce the space occupied, ensure that the cooling airflow is not blocked by the cables, and ensure that the equipment can be quickly located in case of failure.
5、 Power distribution network: With the increasingly obvious trend of high-density installation of cabinet IT, power distribution network has become the key link for cabinet to play its due role. Whether the power distribution is reasonable or not is directly related to the availability of the entire IT system, which is also a problem that many computer room managers ignored in the past. With the development of IT equipment miniaturization, the installation density of internal combustion engines is increasing, which brings severe challenges to the internal distribution network of internal combustion engines. At the same time, due to the increase of input and output ports, the installation reliability of the distribution system is also required. Once again, considering the demand of most servers for dual power supplies, the power distribution in the cabinet is becoming increasingly complex.
Finally, Micronet believes that the reasonable design of the cabinet power distribution system should follow the principle of taking reliability design as the core, designing specifically for the cabinet system, fully coordinating, and seamlessly cooperating with the power distribution system, while taking into account the convenience of installation, as well as the intelligence, adaptability, operation and maintenance of management. The power distribution system in the cabinet shall keep the power supply close to the load to reduce the fault points on the power path. At the same time, it is necessary to gradually realize the local and remote monitoring of load current, as well as the remote control of power distribution, and incorporate the power distribution management into the intelligent management system of the entire machine room.
The above is what Micronet introduced to you about how to choose the cabinets for renting cabinets. I hope it will be helpful for you. Micronet has focused on hosting and renting BGP cabinets for more than ten years. It is a professional IDC data cabinet hosting and leasing provider in Jiangsu Province, specializing in providing BGP cabinet leasing, BGP multi line server hosting BGP multi line server leasing and other services, Baidu standard customized cabinet, 48U super capacity, reduce user cabinet rental fees. If necessary, please contact Micronet.
Lease of BGP cabinet: hopechilam.com
