Rent a server? What performance indicators should we look at? What are the main performance indicators of server renting in Zhengzhou? Rent Zhengzhou server? What are the main performance indicators about this problem? Today Tengyou Bianxiao will give you a detailed introduction.
In the server market, it is impossible to rent servers cheaply, let alone replace servers with PCs. But it is not advisable to blindly pursue the high performance and high configuration of the machine at the same time. The key is to look at the performance, the measured performance price ratio, but how to judge a performance? Therefore, a series of quantifiable performance indicators are needed as a reference for judging performance. Today, Tengyou will introduce to you what performance standards should be looked at when renting one
When renting a server, to choose a high-quality server, you should look at the following server performance:
1、 Memory
For entry-level servers, the memory is usually between 8GB and 64GB. For high-end servers, it can be further expanded from 128GB to 512GB. Depending on the processor and motherboard, these memory modules have different types and speeds. However, memory speed has a much smaller impact on the overall performance of server leasing. In addition, your server must be able to upgrade memory for future expansion, so that you do not have to migrate to other servers
2、 Processor
To deploy huge CPU processing power, you need enterprise class processors like Intel Xeon processors.
With its hyper threaded architecture, multi-core, larger L3 cache and the ability to handle intensive loads, these processors can provide powerful processing power. In addition, Xeon CPU supports ECC memory, which can detect and correct the most common data corruption before it occurs, thus ensuring the data integrity and stability of the system.
3、 Disk array
For any multi disk server lease, disk array is very important because it can improve the performance and reliability of data storage. Many entry-level servers are equipped with RAID0 or 1 with limited options, but it is better to use RAID5 or RAID10 at least. For Windows based servers, hardware RAID is more common, and its advantages are better realized. In contrast, software RAID is more popular in open source systems, and its low cost makes it an attractive choice.
4、 Storage type
When configuring the server, you can select either a solid state hard disk or a traditional hard disk. The hard disk drive has a rotating disk and a read/write arm that uses magnetism to store data. The SSD has no moving parts and stores the information in the flash memory chip. For these features, SSDs are faster and more expensive.
For best performance, we recommend installing all SSDs on the server, or at least using hybrid options for better performance. With the hybrid option, the operating system is installed on the SSD and the standard HDD is used to store files.
5、 Bandwidth and line
Bandwidth is usually described as the data transmission rate of the server or the amount of data that can be transmitted by the data network in a given period of time.
The route of server rental service determines the stability and speed of data transmission to your destination. Tengyou suggested to open two-way CN2 from China Telecom to the mainland of China. Based on BGP international multi line, the system can intelligently switch the best route according to the network health, and always ensure fast.
I hope the above points can help you correctly understand the factors that affect the server and performance, and help you choose the best server rental service without affecting the performance.
