- Is the machine cabinet managed to limit power?
Answer: The hosting of the whole machine cabinet provides 10A current by default, and each machine room has an upper limit of 16A. - Can I change parts for free?
Answer: It can provide parts replacement and installation services. Customers are required to provide relevant replacement parts. - Does the computer room support KVM and IPMI management?
Answer: Yes, IPMI management requires server support. - Can I enter the machine room to maintain the machine?
Answer: Yes, it needs to be hosted on the console server in advance Computer room authorization application Submit relevant information on the page. - Is the machine room on duty at night?
Answer: The machine room is manned for 7x24 hours. - Does hosting support tower servers?
Answer: Tower server hosting is not supported. Please try to use rack server for hosting. - How to calculate the bandwidth of a multi NIC server?
A: If it is hosted by a single server, only one network card can enjoy Internet services, and the bandwidth is the value of the bandwidth you purchased. Other network cards can be used as intranet connections. If it is managed by the whole machine cabinet, you can assign it by yourself. - Do you support dual power managed servers?
A: Yes. - Does the hosting server have an intranet IP address?
Answer: You can assign an intranet. It is recommended that you use a separate network card as the intranet connection so that you can enjoy the advantages of intranet transmission. - How many devices can be placed in a whole cabinet?
Answer: It depends on two factors: space and current
- Space: based on the 42U total available space of the cabinet, at least 1U of heat dissipation and maintenance space is reserved between each device, and the space occupied by the device carrier board is about 0.2U, so:
If the average space occupied by a 1U device is 2.2U, a maximum of 18 devices (1 switch+17 1U servers) can be placed.
If the average space occupied by a 2U device is 3.2U, a maximum of 13 devices (1 switch+12 2U servers) can be placed.
The analogy of equipment of other sizes is as follows: if the size of the equipment itself is+1.2U, it is the total occupied space of a single equipment. - Current: If the total current exceeds the standard, but there is still room, you cannot continue to add new products on the shelf at this time.
|
